中文版     ENGLISH 
新闻中心
联系我们更多>>
深圳市百千成电子有限公司
地址:深圳市光明新区长圳社区长凤路343号
电话:86-0755-26788241
传真:86-0755-26788245
公司新闻新闻中心 > 公司新闻 > PCB Assembly:Exposed Vias in BGA Pads    

PCB Assembly:Exposed Vias in BGA Pads

点击数:1  发布日期:2017/7/3
    Open or exposed vias are never put in BGA pads. However, it is permitted to place them between the pads if a complete solder mask dam is inserted between the pad and the via. You can also instruct your PCBA assembly house to fill and plate the vias, but only use metal on the PGA pad. 


    You have more flexibility when using other types of components. But you have to make some choices and follow accepted guidelines. Let use consider a large part, such as a voltage regulator, where the vendor advises to connect vias to the thermal pad in the ground plane, or on the back side of the board in the thermal area. For this application, it is similar to the way a QFN is treated; read our recommendations regarding that type of package. 


    In applications where you have a lot of room, which gives you flexibility, if you have exposed vias, you may experience that solder is pulled to the reverse side of the board. This is okay if the vias are very small. However, this is not a wise practice. 


    Your choices come with pluses and minuses. For example, some manufacturing engineers recommend that a via should never be filled or capped because it would inhibit the transfer of heat. Conversely, power component vendors say you should not use an un-manufacturable design to meet product design requirements. The best choice is to cap the via with solder mask, but make it as small as possible (i.e., 100-125 microns bigger than the via). You should section off the paste stencil layer in segments. Remember, problems may occur if solder paste is placed on top of an exposed via or masked via.
公司地址:深圳市光明新区长圳社区长凤路343号    电话:86-0755-26788241    传真:86-0755-26788245
Copyright 2013 深圳市百千成电子有限公司. 粤ICP备06061046号
PCBA加工厂|SMT贴片加工厂||SMT加工|贴片加工|SMT贴片加工|DIP加工|插件加工|DIP插件加工|后焊加工|组装测试加工|电路板加工|PCBA加工|电子产品加工|OEM（代工代料）加工|ODM研发设计加工|PCBA来料加工|电子包工包料|深圳PCBA加工|中国EMS代工厂|无铅贴片,无铅插件加工|电子产品开发设计及制造|单片机开发